kais/vm-ros-provisioning
1
0
نسخ 0
الشفرة المشكلات طلبات السحب Actions Packages المشاريع الإصدارات الويكي النشاط

Added arduino libs

تصفح المصدر
هذا الالتزام موجود في:
Mik6e6
2020-07-04 12:31:18 -04:00
ملتزم من قبل GitHub
الأصل 3d9b49e518
التزام dc9596f994
90 ملفات معدلة مع 9419 إضافات و0 حذوفات
تنزيل ملف التصحيح تنزيل ملف الاختلاف توسيع جميع الملفات طي جميع الملفات

205
libraries/EnableInterrupt/examples/HiSpeedAllPins2560/HiSpeedAllPins2560.ino Normal file
عرض الملف

@@ -0,0 +1,205 @@
// EnableInterrupt example sketch: Hi Speed Interrupts, ATmega2560/compatible, all pins
// See the Wiki at https://github.com/GreyGnome/EnableInterrupt/wiki
#define NEEDFORSPEED
#define INTERRUPT_FLAG_PINSS iflag_pinSS
#define INTERRUPT_FLAG_PINSCK iflag_pinSCK
#define INTERRUPT_FLAG_PINMOSI iflag_pinMOSI
#define INTERRUPT_FLAG_PINMISO iflag_pinMISO
#define INTERRUPT_FLAG_PIN10 iflag_pin10
#define INTERRUPT_FLAG_PIN11 iflag_pin11
#define INTERRUPT_FLAG_PIN12 iflag_pin12
#define INTERRUPT_FLAG_PIN13 iflag_pin13
#define INTERRUPT_FLAG_PIN14 iflag_pin14
#define INTERRUPT_FLAG_PIN15 iflag_pin15
#define INTERRUPT_FLAG_PINA8 iflag_pinA8
#define INTERRUPT_FLAG_PINA9 iflag_pinA9
#define INTERRUPT_FLAG_PINA10 iflag_pinA10
#define INTERRUPT_FLAG_PINA11 iflag_pinA11
#define INTERRUPT_FLAG_PINA12 iflag_pinA12
#define INTERRUPT_FLAG_PINA13 iflag_pinA13
#define INTERRUPT_FLAG_PINA14 iflag_pinA14
#define INTERRUPT_FLAG_PINA15 iflag_pinA15
#define INTERRUPT_FLAG_PIN70 iflag_pin70
#define INTERRUPT_FLAG_PIN71 iflag_pin71
#define INTERRUPT_FLAG_PIN72 iflag_pin72
#define INTERRUPT_FLAG_PIN73 iflag_pin73
#define INTERRUPT_FLAG_PIN74 iflag_pin74
#define INTERRUPT_FLAG_PIN21 iflag_pin21
#define INTERRUPT_FLAG_PIN20 iflag_pin20
#define INTERRUPT_FLAG_PIN19 iflag_pin19
#define INTERRUPT_FLAG_PIN18 iflag_pin18
#define INTERRUPT_FLAG_PIN2 iflag_pin2
#define INTERRUPT_FLAG_PIN3 iflag_pin3
#define INTERRUPT_FLAG_PIN75 iflag_pin75
#define INTERRUPT_FLAG_PIN76 iflag_pin76
#define INTERRUPT_FLAG_PIN18 iflag_pin18
#define INTERRUPT_FLAG_PIN19 iflag_pin19
#define INTERRUPT_FLAG_PIN20 iflag_pin20
#define INTERRUPT_FLAG_PIN21 iflag_pin21
#include <EnableInterrupt.h>
volatile uint8_t externalInterruptCounter=0;
volatile uint8_t anyInterruptCounter=0;
#ifdef ARDUINO_MEGA
#define PINCOUNT(x) iflag_pin ##x
#define setupInterrupt(x) \
EI_printPSTR("Add pin: "); \
EI_printPSTR(#x); \
EI_printPSTR("\r\n"); \
pinMode( x, INPUT_PULLUP); \
enableInterruptFast(x, CHANGE)
#define updateOn(x) \
if (PINCOUNT(x) != 0) { \
printIt((char *) #x, PINCOUNT(x)); \
PINCOUNT(x)=0; \
}
#else
#error This sketch supports 2560-based Arduinos only.
#endif
void printIt(char *pinNumber, uint8_t count) {
EI_printPSTR("Pin ");
Serial.print(pinNumber);
EI_printPSTR(" was interrupted: ");
Serial.println(count, DEC);
}
// Attach the interrupt in setup()
// NOTE: PORTJ2-6 (aka, "Pin '70', '71', '72', '73', '74'" are turned on as OUTPUT.
// These are not true pins on the Arduino Mega series!
void setup() {
Serial.begin(115200);
EI_printPSTR("---------------------------------------");
// PINS 0 and 1 NOT USED BECAUSE OF Serial.print()
setupInterrupt(SS);
setupInterrupt(SCK);
setupInterrupt(MOSI);
setupInterrupt(MISO);
setupInterrupt(10);
setupInterrupt(11);
setupInterrupt(12);
setupInterrupt(13);
setupInterrupt(14);
setupInterrupt(15);
setupInterrupt(A8);
setupInterrupt(A9);
setupInterrupt(A10);
setupInterrupt(A11);
setupInterrupt(A12);
setupInterrupt(A13);
setupInterrupt(A14);
setupInterrupt(A15);
////
DDRJ |=0b01111100; // Non-Arduino Port J pins all become output.
PORTJ|=0b01111100; // Turn them all high.
enableInterruptFast(70, CHANGE);
enableInterruptFast(71, CHANGE);
enableInterruptFast(72, CHANGE);
enableInterruptFast(73, CHANGE);
enableInterruptFast(74, CHANGE);
// External Interrupts
setupInterrupt(21);
setupInterrupt(20);
setupInterrupt(19);
setupInterrupt(18);
setupInterrupt(2);
setupInterrupt(3);
////
DDRE |=0b11000000; // Non-Arduino Port E pins all become output.
PORTE|=0b11000000; // Turn them all high.
enableInterruptFast(75, CHANGE);
enableInterruptFast(76, CHANGE);
}
uint8_t otherToggle=1;
uint8_t enabledToggle=1;
uint8_t disableCounter=0;
// In the loop, we just check to see where the interrupt count is at. The value gets updated by the
// interrupt routine.
void loop() {
uint8_t jbits =0b01111110; // PJ2
uint8_t njbits=0b00000001; // PJ2
uint8_t ebits =0b11000000; // PE6/7
uint8_t nebits=0b00111111; // PE6/7
EI_printPSTR("------\r\n");
delay(1000); // Every second,
if (disableCounter & 0x08) {
EI_printPSTR("Toggle 20, 71, 75, A8, 15, MISO...");
delay(1000);
if (enabledToggle==1) {
EI_printPSTR("---OFF---");
disableInterrupt(20);
disableInterrupt(71);
disableInterrupt(75);
disableInterrupt(15);
disableInterrupt(A8);
disableInterrupt(MISO);
enabledToggle=0;
}
else {
EI_printPSTR("***ON***");
setupInterrupt(20);
enableInterruptFast(71, CHANGE);
enableInterruptFast(75, CHANGE);
setupInterrupt(15);
setupInterrupt(A8);
setupInterrupt(MISO);
enabledToggle=1;
}
disableCounter=0;
}
PORTE &= nebits;
PORTJ &= njbits;
// *out &= njbits;
delay(1);
PORTE |= ebits;
PORTJ |= jbits;
// *out |= jbits;
delay(1);
updateOn(SS);
updateOn(SCK);
updateOn(MOSI)
updateOn(MISO);
updateOn(10);
updateOn(11);
updateOn(12);
updateOn(13);
updateOn(14);
updateOn(15);
updateOn(A8);
updateOn(A9);
updateOn(A10);
updateOn(A11);
updateOn(A12);
updateOn(A13);
updateOn(A14);
updateOn(A15);
// External Interrupts
updateOn(2);
updateOn(3);
updateOn(18);
updateOn(19);
updateOn(20);
updateOn(21);
// Fake Arduino Pins
updateOn(70);
updateOn(71);
updateOn(72);
updateOn(73);
updateOn(74);
// External Interrupts
updateOn(75);
updateOn(76);
if (externalInterruptCounter > 0) { EI_printPSTR(" ext: "); Serial.println(externalInterruptCounter); }; \
externalInterruptCounter=0;
disableCounter++;
}